SILVERLUBE-VPM Low-Pressure is an oil-lubricated PM VFD screw compressor range at 22-200 kW and 2-5 bar.
Description
SILVERLUBE-VPM low-pressure oil-lubricated screw compressor
SILVERLUBE-VPM Low-Pressure is an oil-lubricated screw compressor with permanent-magnet VFD, set up for process air below typical plant pressure. It is for lines that need a lot of air at 2-5 bar, not 8-13 bar utility air.
SILVERLUBE-VPM Low-Pressure at a glance
- Type
- Oil-lubricated screw
- Drive
- Permanent-magnet VFD
- Power range
- 22-200 kW
- Pressure range
- 2-5 bar
What range does SILVERLUBE-VPM Low-Pressure cover?
The low-pressure VPM table covers 22-200 kW at 2-5 bar. Do not mix this range with the 8/10/13 bar SILVERLUBE tables.
Low-pressure table
22-200 kW
- Pressure range
- 2-5 bar
- Drive
- Permanent-magnet VFD
- Architecture
- Single-stage screw
How to choose
By process pressure
- Start with
- Required FAD at 2-5 bar
- Do not mix
- 8/10/13 bar family rows
- Before a quote
- Confirm the model
Use the brochure for the full model table, then confirm the selected model before quotation.
How do you select a low-pressure screw compressor?
Start with the process pressure. If the line really runs at 2-5 bar, use this table. If you need 8 bar or more, use the general SILVERLUBE-VPM page.
Duty point
Confirm process pressure
Record required FAD at the real 2-5 bar working point.
Site fit
Check power and cooling
Confirm electrical supply and ventilation against the current datasheet.
Quote check
Select the exact model
Confirm the model, FAD and package contents before quotation.
What should you confirm before asking for a quote?
These checks keep a series overview from being treated as a project specification. Wider system design stays a separate discussion when it is needed.
- the exact low-pressure VPM model
- process working pressure
- free air delivery at that pressure
- electrical supply
- cooling and space
- the current datasheet and package contents
Frequently asked questions
What power range does this low-pressure range cover?
22-200 kW in the low-pressure VPM table.
What pressure does it run?
2-5 bar. It is not the 8/10/13 bar SILVERLUBE table.
Is this a system design page?
No. It is a product page for a low-pressure oil-lubricated VFD screw compressor.
