StationPack SN-V2 is a vertical PM VFD screw air compressor station. Choose from 3.7-30 kW and 220/380 V; pressure options vary by model.
Description
StationPack SN-V2 vertical integrated screw air compressor station
StationPack SN-V2 is a vertical screw air compressor station with permanent-magnet variable-frequency drive. It is built for plants that need the compressor in a compact tower package, then choose the model against airflow, pressure, power supply and the height they can spare.
SN-V2 at a glance
- Layout
- Vertical tower enclosure
- Drive
- Permanent-magnet VFD
- Power range
- 3.7-30kW
- Electrical supply
- 220 / 380 V
What range does StationPack SN-V2 cover?
SN-V2 covers 3.7 kW to 30kW at 220/380 V. The 3.7-7.5 kW models offer 8, 10 and 12.5 bar. The 11-30 kW models offer 8 and 10 bar. Air delivery and dimensions stay specific to the model you select.
Smaller tower models
3.7-7.5 kW
- Pressure options
- 8 / 10 / 12.5 bar
- Air delivery
- 0.30-0.98 m3/min
- Enclosure
- 690 x 690 x 1,750 mm
Larger tower models
11-22 kW
- Pressure options
- 8 / 10 bar
- Air delivery
- 1.46-3.09 m3/min
- Enclosure
- 900 x 850 x 2,000 mm
Use the brochure for the full model table, then confirm the selected row, FAD, dimensions and configuration before quotation.
How do you select a vertical screw air compressor station?
Start with the air you need at the working pressure. Then check the electrical supply and the tower footprint, and confirm the exact SN-V2 model before you ask for a quote.
Duty point
Set the required airflow and pressure
Write down required FAD and working pressure first. Compare the matching pressure row instead of assuming one airflow figure covers every variant.
Site fit
Check power supply and tower space
SN-V2 uses 220/380 V. The smaller models sit in a 690 x 690 x 1,750 mm tower; the larger models sit in 900 x 850 x 2,000 mm. Confirm clearance and service access against the current datasheet.
Quote check
Lock the exact SN-V2 model
Before quotation, confirm the model designation, pressure and FAD, electrical setup, dimensions and what the package includes. This page is a product guide, not a finished system design.
What should you confirm before asking for a quote?
These six points keep a series overview from being treated as a project specification. Wider system design and air treatment stay a separate discussion when those services are needed.
- the exact SN-V2 model designation
- required operating pressure
- free air delivery at that pressure
- electrical configuration
- tower size and available installation space
- the current datasheet and what the selected package includes
Frequently asked questions
What power range does StationPack SN-V2 cover?
SN-V2 covers 3.7-30 kW. Pressure, air delivery and dimensions depend on the individual model.
Which pressure options does StationPack SN-V2 offer?
The 3.7-7.5 kW models are available at 8, 10 and 12.5 bar. The 11-30 kW models are available at 8 and 10 bar. Confirm the current datasheet before you use any figure in a project specification.
Is StationPack SN-V2 a complete compressed-air-system design?
No. SN-V2 is a vertical integrated screw air compressor station range. Final model choice and any wider system design still need the site conditions.
